Specification:

15 Kilometers. 1080P/60FPS. 60 Milliseconds.Most HD FPV systems make you choose: long range or low latency. Crystal-clear image or robust signal. Daylight performance or night vision. The HGLRC Draco refuses the trade-offs. This is a complete digital HD transmission ecosystem—air unit, ground unit, dual antennas—engineered to deliver 15km of 1080P/60FPS video with 60ms average latency and the versatility of two distinct camera options.Dual Antenna. Dual Receive. Zero Dropouts.The Draco’s dual-transmit, dual-receive antenna architecture with 1W transmission power creates four independent signal paths between your drone and the ground. When one path is blocked by carbon fiber, battery mass, or terrain, three others maintain the link. This isn’t antenna diversity switching between two options. This is true simultaneous dual-channel transmission. The result: a video link that stays locked through concrete structures, dense forests, and extreme range where competing systems fade to static.Two Air Units. One Perfect Match.1. Draco A1 – The Daylight Dominator– 1/2.9-inch sensor with 170° ultra-wide FOV- Maximum situational awareness for freestyle and racing- Expansive peripheral vision—see gates earlier, react faster- Ideal for pilots who fly in bright to moderate lighting2. Draco A2 – The Night Stalker– 1/1.8-inch sensor with 160° FOV- Physically larger sensor captures more light per pixel- Enhanced low-light and night vision capability- Ideal for pilots who fly dawnn, dusk, or after dark- Superior image quality in challenging lighting conditionsBoth versions share the same 1080P/60FPS output, 16:9 aspect ratio, and 60ms latency. The choice is about where and when you fly—not about compromising on core performance.HDM1 Ground Unit. Connect to Anything.The Draco Ground Unit features a standard HDM1output that feeds clean 1080P/60FPS video to FPV goggles, external monitors, or capture cards. Build a dedicated ground station. Connect to a large screen for spectator viewing at races. Record directly to an external DVR. The ground unit accepts 8-36V DC input and includes dual antennas for maximum reception sensitivity.Full Betaflight & INAV OSD IntegrationThe Draco speaks MSP OSD protocol natively. All critical flight data—battery voltage, signal strength, flight mode, GPS coordinates, altitude, warning messages—overlays directly on your HD feed. Configure OSD layout through Betaflight or INAV configurator. No sketchy workarounds. No missing telemetry. The same OSD experience you trust in analog, now in 1080P.21.8 Grams. Standard Mounting. Universal Fit.The air unit weighs just 21.8 grams and measures 32×32×10mm with 25.5×25.5mm mounting holes—drops into frames designed for Caddx Vista, RunCam Link, and other digital VTX standards. The camera uses 19mm mounting spacing compatible with most micro camera brackets. SH1.0 6-pin connector interfaces cleanly with Betaflight and INAV flight controllers. Metal air unit housing doubles as a heat sink for consistent performance during extended flights. 8-36V input covers 2S-8S LiPo direct power.Features* 1080P/60FPS TRUE HD: Native 1920×1080 resolution at 60 frames per second. 16:9 aspect ratio. Cinema-quality footage for flight control and content creation.* 15KM MAX TRANSMISSION RANGE: 1W dual-transmit, dual-receive antenna system. Four signal paths for maximum stability. Three times the range of many competing HD systems.* 60MS AVERAGE LATENCY: Responsive, real-time control. Suitable for high-speed racing, tight freestyle, and scenarios where split-second reactions matter.* DUAL AIR UNIT VERSIONS:A1: 1/2.9′ sensor, 170° FOV—maximum awareness for daylight freestyle and racingA2: 1/1.8′ sensor, 160° FOV—enhanced night vision for dawnn, dusk, and low-light flight* HDM1 GROUND UNIT: Standard HDM1 output. Connect to goggles, monitors, or capture cards. 8-36V DC input. Dual antennas for maximum reception.* FULL BF/INAV OSD (MSP): Native Betaflight and INAV MSP OSD support. Battery voltage, signal strength, flight mode, GPS—all overlaid on your HD feed.* 21.8g AIR UNIT / 25.5×25.5MM MOUNT: Standard Vista/Link footprint. 19mm camera spacing. SH1.0 6-pin FC interface. Fits most modern frames without modification.* METAL HOUSING HEAT DISSIPATION: Durab1e construction. Better thermal management for consistent extended-flight performance.* 8-36V WIDE VOLTAGE: Direct 2S-8S LiPo power. No external BEC required.* MODULAR BUNDLE OPTIONS: Air unit only, ground unit only, or complete A1/A2 system bundles. Build your system your way.

Specification:

Package included: